ADC Switch ASX User Manual

ASX Active Digital Signal Cross-Connect  
Part of ADC KRONEs innovative family of active digital signal cross-connect products, the ASX  
fully integrates an SDH multiplexer with a FlexDSX® cross-connect chassis. The product allows  
easy migration of 2 Mbit equipment to next generation equipment, as well as enabling additional  
capacity and transition to fibre optic backhaul to support increasing data rates.  
The ASX is compatible with existing DSX installations and supports standard DSX functionalities  
and advantages:  
Modular construction, featuring either wire-wrap or LSA-PLUS® punchdown cable  
termination methods  
Easy circuit identification through the integrated LEDs  
Four-port jack cards with dual monitoring ports enable individual circuit monitoring in  
both directions  
Cross-connection and patching of circuits  
Superior, intuitive cable management  
The extremely compact STM-1 level SDH multiplexer supports 1+1 MSP on the link side and  
management features are accessed via GIU interface. By fully integrating an SDH multiplexer into  
the digital distribution frame, the ASX provides space savings, as well as reducing cabling and  
maintenance costs.  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
 
ASX Active Digital Signal Cross-Connect  
O rd e r i n g I n f o r m a t i o n  
Description  
Catalog Number  
ASX with LSA-PLUS® cross-connects, singlemode LC duplex fibre optic connectors, 155 Mbps  
1310 wavelength; distance: 20km  
1310 wavelength; distance: 50km  
1550 wavelength; distance: 80km  
1550 wavelength; distance: 120km  
1550 wavelength; distance: 160km  
ASX-100008-LC  
ASX-110008-LC  
ASX-120008-LC  
ASX-130008-LC  
ASX-140008-LC  
ASX with LSA-PLUS® cross-connects, singlemode SC fibre optic connectors, 155 Mbps, bidirectional  
Tx: 1310, Rx: 1550; distance: 20km  
ASX-100008-SC  
ASX-110008-SC  
ASX-120008-SC  
ASX-130008-SC  
ASX-140008-SC  
ASX-150008-SC  
Tx: 1550, Rx: 1310; distance: 20km  
Tx: 1310, Rx: 1550; distance: 40km  
Tx: 1550, Rx: 1310; distance: 40km  
Tx: 1310, Rx: 1550; distance: 80km  
Tx: 1550, Rx: 1310; distance: 80km  
ASX with STM-1 connector type: 1.6/5.6, 45° angled  
Wire-wrap  
ASX-220001  
LSA-PLUS®  
ASX-220008  
Accessories  
Three-conductor bantam patch cords for E1 jack interface  
Single plug  
0,3 m  
PJ712  
0,92 m  
PJ716  
1,83 m  
PJ722  
3,05m  
PJ1210  
PJ1212  
PJ1415  
PJ1420  
PJ1425  
PJ1430  
PJ1450  
3,66 m  
4,58 m  
6,1 m  
7,63 m  
9,15 m  
15,25 m  
Dual plug  
0,3 m  
PJ762  
0,92 m  
PJ766  
1,83 m  
PJ772  
3,05m  
PJ1310  
PJ1312  
PJ1520  
PJ1525  
PJ1530  
PJ1550  
3,66 m  
6,1 m  
7,63 m  
9,15 m  
15,25 m  
Category 5 RJ45 to RJ45 patch cords  
1 m  
7063 2 527-04  
7063 2 527-10  
3 m  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
3
 
O rd e r i n g I n f o r m a t i o n  
Description  
Catalogue Number  
Fibre optic patch cords  
LC duplex connector (UPC) to LC duplex connector (UPC), 2 m  
7066 1 788-52  
7066 1 718-52  
7066 1 528-52  
7061 2 203-00  
FOA-INLC015  
LC duplex connector (UPC) to SC duplex connector (UPC), 2 m  
LC duplex connector (UPC) to 2 FC duplex connectors (UPC), 2 m  
Universal fibre optic adapter (duplex)  
Fibre optic attenuator, LC 15 dB  
Cross-connect wire  
152 m roll  
DSX-CCW/500  
DSX-CCW/1000  
DSX-CCW/2000  
305 m roll  
601 m roll  
Wire-wrap tool kits  
Manual  
AUX-0X0165  
AUX-0X0800  
6417 2 055-01  
Electronic  
LSA-PLUS® insertion tool  
Specifications  
Dimensions (W x H x D): 209 x 482.6 x 254 mm  
Weight:  
15 kg  
Power:  
<11 Watts, -48VDC; 0.38 Watts for each LED  
ENvIRONMENTAL  
Operations:  
Storage:  
Transport:  
ETS300-019-2-3 class 3.2  
ETS300-019-2-1 class 1.2  
ETS300-019-2-2 class 2.3  
Interfaces:  
64x E1, multiple mapping schemes are supported including 2Mbps framed,  
2Mbps unframed, (2) STM-1, optical (IR/SR/LR) and electrical via SFP modules  
1+1 MSP  
Protection:  
Reliability:  
MTBF > 30 years.  
Management:  
Web-based integrated craft interface (ICI) including the support of smart default  
settings IP based management  
Local management access via 10/100BaseT interface  
SNMP with trap messages supported  
Non-volatile software and database stores including back-up and restoration  
Timing:  
E1 and line timing (Timing Marker) support  
Integrated SDH equipment slave clock (SEC) according to ITU G.813  
Re-timing option on the E1 interfaces  
Standards:  
In compliance with the ITU, ETSI, IEC, IEEE, IETF standards for E1 and SDH equipment  
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080  
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.  
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101  
Specifications published here are current as of the date of publication of this document. Because we are continuously  
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may  
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.  
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features  
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer  
105350AE 11/07 Original  
©
2007 ADC Telecommunications, Inc. All Rights Reserved  
 

2SW LSRC 26925SW LSRC 26923SW LSRC 26940SW LSRC 26940TT User Manual
Acer Network Card R500 User Manual
Agri Fab Spreader 45 02103 User Manual
Alcatel Lucent Network Card VoIP for Enterprise User Manual
AOSafety Headphones MT Series User Manual
Atlona Power Supply AT PS POCC User Manual
Audiovox Automobile Alarm PRO 9649B User Manual
Axis Communications Car Video System M7010 User Manual
Axor Plumbing Product 42021000 User Manual
BC Speakers Speaker 18 PS 46 User Manual